Button Selections (Portable / Accessory)

You should not duplicate a function on multiple controls, i.e., on more than one button, on more than one switch or on a button and a switch. This may cause incorrect radio operation.

Button Selections:

Selection is only valid in the CPS,
and/or available to the RADIO-USER:

Availability of CPS Selections is Based on the Current Hardware:

Beacon

When the radio model / option capable.

Blank

(Intended for controls that are not in use.)

Bluetooth Audio Reroute

When the Bluetooth Enable field is enabled.

This selection must be set for "Conventional" and "Trunking" on the same button; therefore, when selected for "Conventional", the CPS automatically sets the corresponding "Trunking" button selection.

Bluetooth Configuration

When the Bluetooth Enable field is enabled.

This selection must be set for "Conventional" and "Trunking" on the same button; therefore, when selected for "Conventional", the CPS automatically sets the corresponding "Trunking" button selection.

Bluetooth Discoverable On/Off

When the Bluetooth Enable field is enabled, and
when the radio is not LTE-capable.

This selection must be set for "Conventional" and "Trunking" on the same button; therefore, when selected for "Conventional", the CPS automatically sets the corresponding "Trunking" button selection.

Bluetooth Headset PTT

When the Bluetooth Enable field is enabled.

This selection must be set for "Conventional" and "Trunking" on the same button; therefore, when selected for "Conventional", the CPS automatically sets the corresponding "Trunking" button selection.

Bluetooth Inquiry On/Off

When the Bluetooth Enable field is enabled.

This selection must be set for "Conventional" and "Trunking" on the same button; therefore, when selected for "Conventional", the CPS automatically sets the corresponding "Trunking" button selection.

Bluetooth On / Off

When the Bluetooth Enable field is enabled.

This selection must be set for "Conventional" and "Trunking" on the same button; therefore, when selected for "Conventional", the CPS automatically sets the corresponding "Trunking" button selection.

Call Alert

When the Conventional Personality, ASTRO Call Alert Rx / Tx field is set to "Encode" or "Encode & Decode", or

when the Conventional Personality, Non-ASTRO Call Alert Rx / Tx field is set to "Encode" or "Encode & Decode" for the radio's current channel.

When the Trunking Personality, Call Alert / Page Operation field is set to "List Only" or "Unlimited" for the radio's current channel.

Call Response

When the Phone Operation field is not set to "None" for the radio's current channel.

When the Trunking Personality, Phone Operation field is not set to "Disabled", or

when the Trunking Personality, Private Call Type field is not set to "Disabled" for the radio's current channel.

Channel Announcement

When a Voice Announcement file has been selected in the Zone Channel Assignment, Channel Announcement field for the radio's current channel.

Channel Down

This selection must be set on the Conventional and Trunking features at the same time. If you set this selection on Conventional, the corresponding Trunking selection is automatically set.

Availability is model / option dependent.

Channel Search

When selected, always available to the radio-user, and therefore not dependent on any CPS feature or selection.

Channel Up

This selection must be set on the Conventional and Trunking features at the same time. If you set this selection on Conventional, the corresponding Trunking selection is automatically set.

Availability is model / option dependent.

Contacts

When selected, always available to the radio-user, and therefore not dependent on any CPS feature or selection.

DTMF Tone

There are 12 DTMF tones; namely DTMF Tone 0 to 9, DTMF Tone *, and DTMF Tone #.

When selected, the user can send out DTMF code of the assigned DTMF value. For example, when DTMF Tone 9 is selected, the user can send out DTMF Tone 9.

Selection is only available when DTMF Mic Enable is checked.

Dynamic ID

When operating in Conventional communications mode, and

when the Conventional System, Dynamic ID Enable field is enabled for the radio's current channel.

Dynamic Priority

When Scan Mode is enabled, and

when the Scan Type is "Conventional", and

when the Scan List, Dynamic Priority field is enabled for the radio's current landed scan channel.

Emergency

When the Conventional System, Emergency Profile Selection field is not set to "Emergency Tx Disabled" for the radio's current channel.

When the Trunking Personality, Emergency Profile Selection field is not set to "Emergency Tx Disabled" for the radio's current channel.

 For Trunking, Emergency is not available when Failsoft Mode is active and Emergency Blocked in Failsoft is enabled.

Information (Info)

When selected, always available to the radio-user, and therefore not dependent on any CPS feature or selection.

Internet Protocol Address (IP)

When selected, always available to the radio-user, and therefore not dependent on any CPS feature or selection.

Keypad / Controls Lock

When the Radio Ergonomics Wide, Rotary Switch Lock Enable field is enabled (all models), or

when the Radio Ergonomics Wide, Side Buttons Lock Enable field is enabled (all models), or

when the radio has a keypad (model-specific).

Light / Flip (Display)

Long Keypress vs
Short Keypress

When the Auto Light field is disabled.

Location

When the Radio Wide, Location Enable field is enabled.

LTE

When the Data Profile Type of the Conventional System's  referenced Data Profile is "Conventional & Broadband" or "Broadband-Only", and

when the radio is a model APX 7000L.

When the Data Profile Type of the Trunking System's  referenced Data Profile is "Trunking & Broadband" or "Broadband-Only", and

when the radio is a model APX 7000L.

Man Down Clear

When the Emergency Wide, Man Down Trigger field is enabled.

Message

When the Conventional System, Message field is enabled for the radio's current channel.

When the Trunking Personality, Message Enable field is enabled for the radio's current channel.

Monitor

See Latch Enable Time

When selected, always available to the radio-user, and therefore not dependent on any CPS feature or selection.

Multi Function Button Toggle

When selected, always available to the radio-user, and therefore not dependent on any CPS feature or selection.

MS01–MS13 (Mode Select)

When selected, always available to the radio-user, and therefore not dependent on any CPS feature or selection.

The APX� 3000 Portable only supports MS01 and MS02.

Multiple Private Line (MPL)

When the Conventional Personality, Rx Voice/Signal Type field is set to "Non-ASTRO" or "Mixed Mode", and

when the Conventional Personality, User Selectable PL [MPL] field is enabled for the radio's current channel.

Nuisance Delete

When Scan Mode is enabled.

One Touch 1–4

When at least one Conventional Personality, One Touch Button Feature is not set to "Disabled" for the radio's current channel.

When at least one Trunking System, One Touch Button Feature is not set to "Disabled" for the radio's current channel.

For the APX™ 3000 Portable, or Portables having just a top display or a front display and menu buttons only, this selection is limited to RAB, RTT and Status selections as a Conventional feature, and the Status selection as a Trunking feature.

Phone

When the Conventional Personality, Phone Operation field is not set to "None" for the radio's current channel.

When the Trunking Personality, Phone Operation field is not set to "Disabled" for the radio's current channel.

PL Disable

When operating in Conventional communications mode, and

when the radio is model / option capable.

Priority Channel PTT

When operating in Conventional communications mode, and

when there is a Priority Member 1 Scan List Member in the current channel's Scan List.

Radio Profiles

When selected, always available to the radio-user, and therefore not dependent on any CPS feature or selection.

Recent Calls

When selected, always available to the radio-user, and therefore not dependent on any CPS feature or selection.

Rekey Request

Requires a radio-user Long Keypress.

When the ASTRO OTAR Information, User Selectable Rekey Request is not set to "Disabled", or

when the MDC OTAR, Rekey Request Mode is not set to "Disabled".

Repeater Access Button 1 (RAB1)

When the Conventional Personality, Repeater Access field is enabled, and

when the Access Type is set to "Manual" for the radio's current channel.

This feature is not available on Side Button 1 when Radio Lock is enabled.

Repeater Access Button 2 (RAB2)

When the Conventional Personality, Repeater Access field is enabled, and

when the Access Type is set to "Manual" for the radio's current channel.

This feature is not available on Side Button 1 when Radio Lock is enabled.

Reprogram Request

When the Trunking System, System Type is "ASTRO 25", and

when the Trunking System, Dynamic Regrouping Enable field is enabled for the radio's current channel.

Request-To-Talk (RTT)

When the Conventional Personality, MDC RTT Button Access field is set to "Manual" for the radio's current channel, and

when that Personality is not a Receive Only Personality, and

when Tx Inhibit is not enabled.

Scan

Long Keypress vs
Short Keypress

When the Scan Type is not set to "Voting Scan", and

when the Conventional Personality, Scan List Selection field is not set to "None", and

when the Conventional Personality, Automatic Scan field is disabled for the radio's current channel.

When the Trunking Personality, Scan List Selection field is not set to "None", and

When the Trunking Personality, Automatic Scan field is disabled for the radio's current channel.

This selection can not be set concurrently on Buttons, Switches and Menu Items; however, it can be set concurrently on Portable and Accessory Buttons.

Secure Tx Select

When any one of the Conventional Secure / Clear Strapping fields is set to "Select" for the radio's current channel, and

when the radio is model / option capable.

When any one of the Trunking Secure / Clear Strapping fields is set to "Select" for the radio's current channel, and

when the radio is model / option capable.

Select / Private Call

When the Conventional Personality, ASTRO Selective Call Rx/Tx is set to "Encode" or "Encode & Decode", or

when the Conventional Personality, Non-ASTRO Selective Call Rx/Tx is set to "Encode" or "Encode & Decode" for the radio's current channel.

When the Trunking Personality, Private Call Type is not set to "Disabled" for the radio's current channel.

Site Display / Srch

Long Keypress vs
Short Keypress

When the Trunking System, Site Alias Enable field is enabled for the radio's current channel.

Site Lock / Unlock

Long Keypress vs
Short Keypress

When the Trunking System, Site Alias Enable field is enabled for the radio's current channel.

Status

When the Conventional System Status field is enabled for the radio's current channel.

When the Trunking Personality Status Enable field is enabled for the radio's current channel.

Talkaround / Direct

When operating in Conventional communications mode, and

when the Conventional Personality, Direct/Talkaround field is enabled for the radio's current channel.

This selection can not be set concurrently on Buttons, Switches and Menu Items; however, it can be set concurrently on Portable and Accessory Buttons.

Talkgroup

When the Conventional Personality, ASTRO Talkgroup Selection Type field is set to "Selectable" for the radio's current channel.

Text Messaging Service (TMS)  

Long Keypress vs Short Keypress

When the Conventional System, Text Messaging Service field is set to "List Only" or "Unlimited", and

when that System's Data Profile Selection is not set to "Data Disabled" for the radio's current channel.

When the Trunking System, Text Messaging Service field is set to "List Only" or "Unlimited", and

when that System's Data Profile Selection is not set to "Data Disabled" for the radio's current channel.

Third Party

When selected, always available to the radio-user, and  therefore not dependent on any CPS feature or selection.

TMS Query

When the Conventional System, Text Messaging Service field is set to "List Only" or "Unlimited", and

when that System's Data Profile Selection is not set to "Data Disabled" for the radio's current channel.

When the Trunking System, Text Messaging Service field is set to "List Only" or "Unlimited", and

when that System's Data Profile Selection is not set to "Data Disabled" for the radio's current channel.

TMS Quick Text

When the Conventional System, Text Messaging Service field is set to "List Only" or "Unlimited", and

when that System's Data Profile Selection is not set to "Data Disabled" for the radio's current channel.

When the Trunking System, Text Messaging Service field is set to "List Only" or "Unlimited", and

when that System's Data Profile Selection is not set to "Data Disabled" for the radio's current channel, and

Tx Inhibit

This selection must be set on the Conventional and Trunking features at the same time. If you set this selection on Conventional, the corresponding Trunking selection is automatically set.

Availability is model / option dependent.

Unprogrammed

(Intended for controls that are not in use.)

User

When selected, always available to the radio-user, and therefore not dependent on any CPS feature or selection.

Voice Mute

When the Conventional Personality, ASTRO Call, In-Call User Alert Enable field is enabled for the radio’s current channel, or

when the Conventional Personality, Non-ASTRO Call In-Call User Alert Enable field is enabled for the radio’s current channel.

When the Trunking Personality, In-Call User Alert Enable field is enabled for the radio’s current channel.

Volume Down

This selection must be set on the Conventional and Trunking features at the same time. If you set this selection on Conventional, the corresponding Trunking selection is automatically set.

Availability is model / option dependent.

Volume Set Tone

When selected, always available to the radio-user, and therefore not dependent on any CPS feature or selection.

Volume Up

This selection must be set on the Conventional and Trunking features at the same time. If you set this selection on Conventional, the corresponding Trunking selection is automatically set.

Availability is model / option dependent.

Wi-Fi On/Off

This button-press activates and deactivates Wi-Fi capability of the radio.

Zone Bank

This legacy selection has been replaced by Zone Bank Up.

Zone Bank Down

This selection must be set on the Conventional and Trunking features at the same time. If you set this selection on Conventional, the corresponding Trunking selection is automatically set.

In order for Zone Bank Down to be set on an Accessory Button, this selection should first be set on a Portable Button.

When "Zone Bank Down" is set on a Button, Zone Select is automatically set on Conventional and Trunking Toggle Switches and it can not be set on Conventional and Trunking Concentric Switches, or the Rotary Switch.

Zone Bank Up

This selection must be set on the Conventional and Trunking features at the same time. If you set this selection on Conventional, the corresponding Trunking selection is automatically set.

In order for Zone Bank Up to be set on an Accessory Button, this selection should first be set on a Portable Button.

When "Zone Bank Up" is set on a Button, Zone Select is automatically set on Conventional and Trunking Toggle Switches and it can not be set on Conventional and Trunking Concentric Switches, or the Rotary Switch.

Zone Down

This selection must be set on the Conventional and Trunking features at the same time. If you set this selection on Conventional, the corresponding Trunking selection is automatically set.

Availability is model / option dependent.

Zone Up

This selection must be set on Conventional and Trunking features at the same time. If you set this selection on Conventional, the corresponding Trunking selection is automatically set.

Availability is model / option dependent.